Devices
For the MeshCore network
MeshCore is available on a wide range of LoRa devices. Each device can run different types of firmware depending on its intended use in the network.
A current list of supported devices can be found at https://meshcore.io/flasher.
LoRa devices are available in different frequency bands (433 MHz, 868 MHz, and 915 MHz). In Germany, the 868 MHz band is currently the most widely used.
Ebyte EoRa-S3-900TB
Development board from Ebyte (Chengdu EBYTE Electronic Technology) based on the ESP32-S3FH4R2 (2 MB PSRAM, 4 MB Flash) with an integrated Ebyte…
Elecrow ThinkNode M1
Compact, ready-to-use device featuring an nRF52840, SX1262, and a 1.54" e-paper display (200×200 px, SSD1681). Built-in GPS (GPS/GLONASS/BeiDou/QZSS),…
Elecrow ThinkNode M2
ESP32-S3-based compact model from the ThinkNode family, available without a display (or with a 1.3-inch OLED). SX1262 LoRa, 1000 mAh battery. Smaller…
Elecrow ThinkNode M3
Credit-card-sized nRF52840 tracker from Elecrow with Semtech LR1110 transceiver. Integrated GNSS module, environmental sensors (temperature, humidity,…
Elecrow ThinkNode M5
ESP32-S3 version of the ThinkNode (complementary to the nRF52840-based M1). SX1262 LoRa chip, 1.54'' e-paper display (EPD), GPS…
Elecrow ThinkNode M6
Fully assembled outdoor solar repeater node from Elecrow. nRF52840 + SX1262 (nRFLR1262 module). 6W MPPT solar panel, two 18650 batteries (7000 mAh…
GAT562 30S Mesh Kit (1W)
High-power version of the GAT562 product line with 30 dBm (1 W) transmit power thanks to an integrated PA module and SAW filter. nRF52840 + SX1262,…
GAT562 Mesh EVB Pro
Development board (EVB) from the GAT562 family by MTools Tec, based on the nRF52840 with SX1262 LoRa. RAK4631-compatible pinout for easy porting.…
GAT562 Mesh Tracker Pro
Fully assembled handheld device from MTools Tec (GAT562 product line) based on the nRF52840 and SX1262. Integrated GNSS module, 1.3-inch TFT color…
All information is provided without warranty.