Hardware
For the MeshCore network
MeshCore is available on a wide variety of LoRa devices. Depending on its intended use within the network, each device can run different types of firmware.
A current list of supported devices can be found at https://meshcore.io/flasher.
LoRa devices are available in various frequency bands (433 MHz, 868 MHz, and 915 MHz). In Germany, the 868 MHz band is currently the most widely used.
Heltec MeshTower V2
The Heltec MeshTower V2 is a rugged, solar-powered outdoor mesh node based on the nRF52840 MCU and the SX1262 LoRa transceiver. It combines an…
Heltec Vision Master E213
The Heltec Vision Master E213 (HT-VME213) is a compact development kit based on the ESP32-S3R8 microcontroller with a 2.13-inch black-and-white E-Ink…
Heltec Vision Master E290
The Heltec Vision Master E290 (HT-VME290) is an E-Ink development kit featuring a 2.90-inch black-and-white E-Ink display (296x128 pixels) and an…
Heltec WiFi LoRa 32 V2
Classic Heltec board with ESP32 and SX1276. Tried and true, and well-documented. Community firmware: Companion BLE/USB, Repeater, Room Server. Older…
Heltec WiFi LoRa 32 V3
A very popular ESP32-S3-based LoRa board with an SX1262 and an integrated 0.96" OLED display. Community firmware: Companion BLE/USB, Repeater, Room…
Heltec WiFi LoRa 32 V4
Latest generation of the classic Heltec board. ESP32-S3R2 with 2 MB PSRAM and 16 MB Flash. TX power up to 28 dBm (high-power version). Improved RF…
Heltec Wireless Paper
E-Ink development board with a 2.13" black-and-white E-Ink display (250×122 px). ESP32-S3FN8 + SX1262. Up to 180 days of static display without power.…
Heltec Wireless Tracker V1.1
Compact GPS tracking device with SX1262 and a 0.96" TFT color display. UC6580 GPS module with high sensitivity. Built-in 600-mAh battery. Community…
Heltec Wireless Tracker V2
Successor to the Wireless Tracker V1.1 with significantly improved transmission power (28 dBm, KCT8103L PA/LNA) and a more compact LDS antenna design…
All information is provided without warranty.